Head Tube Fork Stops

Questions and comments about converting to beefier forks..
Post Reply
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 451
Joined: 07:50 pm May 26 2017
Country: USA

Head Tube Fork Stops

Post by VTMTcowboy » 12:14 pm Oct 15 2020

I know the obviously answer, find a welder. But, is there anything I can do in the interim to stop my upper triple clamps from hitting the gas tank? I was considering some neoprene or padded tape, but just wondering what other solutions people have come up with? I've developed a small notch on each side and would like to stop this from getting any deeper until I can get the proper welding done. Also, does anyone have pictures of a the weld job, which will help me better explain what needs to get done?

Thank you!
1997 KDX 220
2004 KDX 200

User avatar
ericr
Gold Member
Gold Member
Posts: 219
Joined: 06:57 pm Nov 06 2017
Country: USA
Location: Western WA State

Re: Head Tube Fork Stops

Post by ericr » 03:22 pm Oct 15 2020

Some people have added shims or drilled and tapped for a small screw in the stop.

You can use Google to search this site. Type "steering stop site:kdxrider.net" without the quotes.
'02 KDX 200, '02 KDX 220, '18 Beta Xtrainer - My restoration thread

User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 451
Joined: 07:50 pm May 26 2017
Country: USA

Re: Head Tube Fork Stops

Post by VTMTcowboy » 04:30 pm Oct 15 2020

Right on. Thank you sir!
1997 KDX 220
2004 KDX 200

User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 11823
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Head Tube Fork Stops

Post by KDXGarage » 11:34 pm Oct 15 2020

Someone actually makes a commercial product for the KX250 to run KX450F forks. I don't know if it will fit a KDX, but you can see what it looks like at least.

Anything to make it wider.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128

User avatar
Tyl3r
Platinum Member
Platinum Member
Posts: 1203
Joined: 06:51 pm Nov 26 2012
Country: MERICA
Location: SW Pennsylvania

Re: Head Tube Fork Stops

Post by Tyl3r » 11:30 am Oct 19 2020

I saw that drill and tap one before too, that looked like a good one.

KDXGarage - Is this the one you were thinking of? http://trickeng.com/product/kx125-250-s ... p-adapter/
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Sumo toy

User avatar
bufftester
Platinum Member
Platinum Member
Posts: 2901
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Head Tube Fork Stops

Post by bufftester » 04:00 pm Oct 19 2020

The unit from Trick is pretty slick. Easier solution is the screw mod where you drill and tap the tangs on the lower triple clamp and add a screw. Can easily be done without disassembling anything.

User avatar
doakley
Gold Member
Gold Member
Posts: 931
Joined: 02:58 pm Mar 10 2016
Country:

Re: Head Tube Fork Stops

Post by doakley » 04:24 pm Oct 19 2020

I did that. Tapped the existing stop and threaded in a screw. Worked well when I put KX forks on my ‘99 KDX frame.

User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 11823
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Head Tube Fork Stops

Post by KDXGarage » 01:14 am Oct 20 2020

I think that is the one. That is for clamps that came on aluminum framed bikes, but it gives a concept for forks from steel framed bikes.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128

User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5814
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: Head Tube Fork Stops

Post by Julien D » 02:58 pm Oct 20 2020

I just used a piece of aluminum stock cut to the size I needed and drilled straight through the stop. Secured with a bolt and nut. Not a very pretty solution but it works fine.
Image

User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 451
Joined: 07:50 pm May 26 2017
Country: USA

Re: Head Tube Fork Stops

Post by VTMTcowboy » 01:05 am Oct 21 2020

Thanks for the responses! I'll go the the drill and tap route.
1997 KDX 220
2004 KDX 200

Post Reply