Build your own KDX fork cartridge holder

A service reference
Post Reply
dsedam
Supporting Member
Posts: 9
Joined: 10:23 pm Nov 10 2013
Country:

Build your own KDX fork cartridge holder

Post by dsedam »

So, after a many a read on several sites and trying to track down a cartridge holder tool, I made one for under $12.

Here is what I used all from a local lowes:

1 - 1/2" x 30" iron pipe
https://lh4.googleusercontent.com/-vjBS ... 165903.jpg

1 - Lfa-668 brass garden hose adapter.
https://lh4.googleusercontent.com/-hstn ... 165844.jpg

The brass was used for a couple reasons -
1. It's soft and your reaching aluminum...
2. Easy to grind with a file for deburring...

Screw the adapter onto the pipe as tight as you can, you can even lock tight it on, I did not.

Using a grinder, cut off the excess threads, making flush the brass "nut" and iron pipe.
https://lh6.googleusercontent.com/-doXy ... 170008.jpg
https://lh5.googleusercontent.com/-aX9X ... 165820.jpg

Deburr the cut and the edges of the nut portion of the brass.
https://lh4.googleusercontent.com/-33jr ... 165827.jpg

Clean the internal span of the pipe, you never know what goodies are in there and it will keep you from potentially scratching your damper rod. Wrap the first 20" or so in electrical tape as it keeps it nice and soft for the metal components touching each other...

Finished product:
https://lh5.googleusercontent.com/-99Tq ... 165810.jpg

Insert the tool over the rod and down into the cartridge, lining it up and you should feel it lock in. Using a 14mm allen socket , found at auto zone in a 3 pack 12mm, 13, mm, 14mm for $12, unscrew your valve.

Dan
New to me 2004 KDX 200
Previously owned 1994 KDX 200
Dan
---------------------------------
2004 KDX 200
1994 KDX 200
---------------------------------
User avatar
Gotanubike
Supporting Member III
Supporting Member III
Posts: 898
Joined: 01:00 pm May 22 2013
Country:
Location: Ontario, Can

Build your own KDX fork cartridge holder

Post by Gotanubike »

Great post, how did you figure a garden hose adapter fits the ARP 12 notched fitment on the damper rod? That adapter is imperial.
1990 KDX200
Bike Profile -> http://www.kdxrider.net/forums/viewtopi ... 61#p136315
Suspension Overhaul(Shock+89-92 conventional forks) -> http://www.kdxrider.net/forums/viewtopi ... 15&t=15255
96'-98' RM125 Showa 49mm fork swap -> http://www.kdxrider.net/forums/viewtopi ... 04&t=16994
KDXrider world map! -> https://www.zeemaps.com/map?group=186158
dsedam
Supporting Member
Posts: 9
Joined: 10:23 pm Nov 10 2013
Country:

Re: Build your own KDX fork cartridge holder

Post by dsedam »

At my lowes the pipe and brass fittings are right across from each other. I knew I needed a soft metal and the brass fittings fit the bill. Bought the nearest size, a little grooming and voila...
Dan
---------------------------------
2004 KDX 200
1994 KDX 200
---------------------------------
sthutch
Supporting Member II
Supporting Member II
Posts: 134
Joined: 07:00 pm Sep 27 2009
Country: USA
Location: Michigan

Re: Build your own KDX fork cartridge holder

Post by sthutch »

Dan,
I gotta say THANK YOU!!! I haven't ridden in a couple years due to loosing my hearing (and balance) in my right ear. Finally, I feel confident in my ability to ride so I pulled my KDX out of storage to get ready. When I put it away I knew I had a leaky fork seal, so that was the first thing on the agenda. A quick search here yielded the tool I needed, and how to make it. Since this was an older post, I did an online search at my local Lowes for the adapter to make sure they carried it. They didn't carry it, but Home Depot did! I went and picked up the parts, followed your steps and presto, had my tool. It worked perfectly!!!

Thanks for posting this!
Sthutch
Sthutch

1st Bike: '72 Arctic Cat Whisker (rode it to the wheels fell off)
2nd Bike: '76 KT250 Trials (gone, but not forgotten)
3rd Bike: '01 KDX200
4th Bike: '96 DS80 (okay, my 9yr old's and it's gone)
5th Bike: '04 RM65 (okay, he's now 10 and it's gone)
6th Bike: '08 KTM 105xc (okay, he's now 13)
7th Bike: '06 KTM 200xc-w (okay, he's now 16)
pumpguy
Gold Member
Gold Member
Posts: 821
Joined: 10:00 am May 29 2012
Country:
Location: Spring Grove, Illinois

Re: Build your own KDX fork cartridge holder

Post by pumpguy »

Would anyone be able to post pictures of parts used? At this late date those originally posted are no longer available.
JRod396
Member
Posts: 1
Joined: 09:51 am Nov 24 2020
Country: United States

Re: Build your own KDX fork cartridge holder

Post by JRod396 »

Pumpguy, what did you end up using or finding? The LFA-668 is no longer available
tystick82
Member
Posts: 33
Joined: 07:30 pm Aug 02 2020
Country: United States
Location: Vermont

Re: Build your own KDX fork cartridge holder

Post by tystick82 »

I just made my cartridge holder the other day. Worked great with a little grooming. The brass part lfa-668 was available at my local Walmart. You could surely pick one up at a plumbing supply store as well. Hope this helps
russell3
Member
Posts: 18
Joined: 09:28 pm Jan 13 2014
Country:

Re: Build your own KDX fork cartridge holder

Post by russell3 »

I was also looking into how to make one of these and didn't really find a good video or pics of one. This is the best thread I've found on the subject, but as stated, the pics don't work in the links anymore. I decided to just built one and did a youtube video on how to do it. I used a piece of pipe and a drilled out bolt head(could have used a nut, but the store didn't have one at the time). I just welded them together. pretty simple. Might not be as nice as finding the threaded adapters spoken of here, but it's an option and it worked great for rebuilding my forks. Hope this helps someone out.

Post Reply