KDXRIDER.NET

Posted: **05:44 pm Oct 04 2010**

... and somehow a set of forks wound up in my garage for cheap

Posted: **06:45 pm Oct 04 2010**

Posted: **07:20 pm Oct 04 2010**

Hoping to have a buddy make an axle and spacer so I can use my wheel and keep the odo. Oh, And the spacer on top clamp

I've never followed any of these threads much, so I've got some catching up to do...

Posted: **04:33 pm Oct 05 2010**

Gonna need a new caliper. Any reason I should choose a kdx over a kx or vice versa?

Or does anyone know if I can use an "H" kdx caliper on a Kx450f fork?

I know the "E" won't work

Posted: **05:16 pm Oct 05 2010**

An H should work....

Posted: **05:24 pm Oct 05 2010**

I figured out why they were so cheap

****!

Posted: **05:37 pm Oct 05 2010**

Gonna let us in on the secret?

Posted: **05:40 pm Oct 05 2010**

Smugmug's running slow, waiting on pics, and looking at fiche

Posted: **05:52 pm Oct 05 2010**

Ok when I picked these up I noticed one of the tubes had the base valve (on top) and the valve assembly on the bottom was loosened

Took it apart to find this

Pretty chewed up looking

Took it apart and could see the culprit down the end of the inner cartridge, luckily I had a pair of tiny extra long needle nose pliers, cuz it was really stuck in there!

Dunno if it's some kinda clip or just a piece of wire some idjit dropped down in there??

Posted: **06:18 pm Oct 05 2010**

Found something in the middle of this piece

Posted: **07:19 pm Oct 05 2010**

Ah... you can fix it!

Posted: **08:53 pm Oct 05 2010**

Yeah.......

Maybe after I get a job

Something looks different

Posted: **01:21 am Oct 06 2010**

Ron Ayers says 130 bux, wonder if it includes all the pieces I'm missing (the fiche is really vague)

Posted: **09:57 am Oct 06 2010**

looks like you're missing the nut and washer on the rod along with the treaded part...maybe that's what you have here::?

[/quote]

Posted: **03:04 pm Dec 11 2010**

Got my parts all made and the stem swapped

Still need to go get my forks parts from the dealer

Posted: **04:59 pm Dec 11 2010**

Did you end up with the KDX wheel fitting?

Posted: **08:29 pm Dec 11 2010**

Have not put it together yet

Just picked up a brake this afternoon

Posted: **09:04 pm Dec 11 2010**

The guy I bought the brake from is building a hybrid

He should be along here shortly

His name is Hoot

Posted: **09:45 pm Dec 11 2010**

Posted: **04:11 pm Dec 12 2010**

I think he's putting an H series 200 into an 04 KX125 frame

KDXRIDER.NET

So I've avoided all this nonsense all these years...

So I've avoided all this nonsense all these years...