Page 1 of 1

parts source

Posted: 03:42 pm Sep 05 2022
by soup-n-sandwich
Hi guys,
I'm up to my neck in a complete rebuild of a 2002 KDX220.
I was hoping to use one source for as much of the replacement parts as possible but finding some of the stuff for a reasonable price isn't easy.
I'm trying to get most of the parts from Rocky Mountain but I can't find everything there. There seems to be a very limited choice for many of the parts. What are you guys using for your part sources?

I'm looking for black MX rear fender, black front fender. I would like a black gas tank but waay to expensive. I'm looking for white radiator shrouds as well.
I need gasket kits for the top and bottom end. Wheel, swing arm, linkage, ,steering, shock bearing/bushings, chain tentioner. Swing arm chain glide pad, chain rollers, radiators, and a much of other parts.

The OEM stuff is over the top, unreasonably expensive but for some of the parts I don't think I have a choice.
What are you guys doing for parts sourcing?

Thanks
Chris

Re: parts source

Posted: 09:49 am Sep 06 2022
by TwistedRoot
I was able to find everything I needed at either RMATV or eBay. There are plenty of legit sellers on eBay with hundreds/thousands of positive feedback. Prices lower than retail and they ship quickly. Make sure your buying from a reputable seller and you wont have issues.

Re: parts source

Posted: 06:51 pm Sep 06 2022
by KDXGarage
There is no one-stop-shop for a bike not sold in 16 years. :-(

Re: parts source

Posted: 09:28 am Sep 12 2022
by Tyl3r
I have always been able to find pretty much everything I needed from RMATV, Motosport, Dennis Kirk, Partzilla for OEM parts, and eBay for used parts only...too many chinese knock-offs to trust anything new on there anymore. Oh yea, frpoffroad.com too

For new, you will probably only be able to find green rad shrouds, green or purple used ones, don't think I've seen very many (if any) white ones for the OEM tank. should be able to find a black maier mx rear fender. for front fender, can use one from pretty much any Japanese bike, just might need to redrill the holes. I like how the 03-05 KX125/250 front fenders look on the KDX's the most, but to each their own. Best bet with the radiators might be to have repaired/straightened/braced by one of the shops you can send them in to. I have heard a lot of horror stories about the new ones for sale on e-bay. The rest of the stuff shouldn't be very hard to find.

Re: parts source

Posted: 06:06 am Sep 13 2022
by MoonStomper
FRPOFFROAD.COM will have the vital stuff for sure, especially parts that make her run.