Page 1 of 1
(02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 10:26 am May 15 2021
by Killerkyle
Bought someone’s build great bike jus tryna figure out what all is different. Only question I have is on the left side of the cylinder it has numbers 1742 which Ik is normal but more to the front a few inches it also has 307 L on it. Tried to search an figure out what it meant can’t find nothing useful online except this website.
Re: (02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 12:24 pm May 15 2021
by KDXGarage
Welcome.
It may be a marking from a cylinder plater. They use codes to keep track of work.
Re: (02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 06:42 pm May 17 2021
by bufftester
The 1742 is the Kawi part number for the cylinder casting. On the right side of the intake manifold will be the displacement (0.197l IIRC for the 200). There are no other factory markings, is the 307L etched in or does it appear cast? As KDXG mentioned, likely a shop marking to track a customer job.
Re: (02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 08:23 pm May 17 2021
by KDXGarage
0.198l (KDX200)
0.216l (KDX220R)
otherwise, the last four digits of the cylinder's part number
Re: (02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 04:35 pm May 21 2021
by Killerkyle
Found out what last post was about but also thinking on turning bike into track build what would be recommend front forks, what would fit? Anyone on here with 03 kdx 200h track build please get with me
Re: (02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 11:30 am May 22 2021
by KDXGarage
a KX front end and revalves rear shock would help some
Re: (02 kdx 200h) on the cylinde what’s the 307 L stand for
Posted: 07:42 pm May 23 2021
by SS109
Killerkyle wrote: 04:35 pm May 21 2021
...track build...
As in MX, Supermoto, what?