Page 1 of 1
1987 KDX200 flywheel won’t come off
Posted: 08:46 pm Sep 01 2020
by Apk_kdx
I just bought an 87 kdx200 and realized that my stators could be busted but I can’t remove them or anything since my flywheel won’t come off. Any suggestions on how to do it?
Re: 1987 KDX200 flywheel won’t come off
Posted: 10:21 pm Sep 01 2020
by KDXGarage
Welcome to kdxrider.net.
Get a steering wheel puller, some washers and a couple of long 6 mm bolts. Grease the end of the bolt in the crankshaft. Even better is to replace the stock bolt with one from a hardware store (metric socket head) and let the puller shaft turn on that instead of the stock bolt.
Re: 1987 KDX200 flywheel won’t come off
Posted: 09:47 pm Sep 02 2020
by Apk_kdx
Thank you. I’ll try that and if this isn’t surface rust I think I’ll get a new one