Page 1 of 1
Time to fix both my kickstart levers
Posted: 02:10 pm Aug 03 2019
by KDXMainer
Ok. So both my kickstarters go back a little to far. I read that some people welded marterial to solve the problem. Welded friend said he could do it as long as it's not aluminum .... is it? One bike is a 98 the other a 2006 if I can't weld it what's the best solution to fix it. Order new knuckle stock or aftermarket? Thanks Mike
Re: Time to fix both my kickstart levers
Posted: 02:40 pm Aug 03 2019
by kdxsully
KDXMainer wrote: 02:10 pm Aug 03 2019
Ok. So both my kickstarters go back a little to far. I read that some people welded marterial to solve the problem. Welded friend said he could do it as long as it's not aluminum .... is it? One bike is a 98 the other a 2006 if I can't weld it what's the best solution to fix it. Order new knuckle stock or aftermarket? Thanks Mike
I THINK they’re casted steel, but I don’t know for sure. If he can’t weld it, someone can. Some kx kickers can swap over too. Search the forum for the write up on that
Re: Time to fix both my kickstart levers
Posted: 03:20 pm Aug 03 2019
by lucy
Both segments are weldable steel.
I added a little metal by welding...and I ain’t a welder. Did 2 of ‘em that way. Worked great. Just takes a little grinding/filing/fitting/shaping.
Go for it.
Re: Time to fix both my kickstart levers
Posted: 01:28 pm Aug 05 2019
by GATOROC
Another option is to go with the shorter kickstart and boss from a KX. This mod is on my "to do list", so hopefully in the near future I can get r done. Link to
Slick Nick's Kickstart Mod
Re: Time to fix both my kickstart levers
Posted: 10:32 am Aug 08 2019
by TwistedRoot
GATOROC wrote: 01:28 pm Aug 05 2019
Another option is to go with the shorter kickstart and boss from a KX. This mod is on my "to do list", so hopefully in the near future I can get r done. Link to
Slick Nick's Kickstart Mod
I recently did this mod. Still getting used to it but I do like it. Also regarding fitment as others have stated, had to grind approx 1-2mm off the bottom of the kicker to fit the Kaw oem KX250 boss.
Re: Time to fix both my kickstart levers
Posted: 08:31 pm Aug 08 2019
by oldmankdx69
I have done the kickstarter mod and have really liked it. The bike is so easy to start anyway and the new one really helps and looks good too. Shop around and it does'nt cost much more than a stock replacement one.