KDXRIDER.NET

Is there an aftermarket part or parts that is no longer made or sold that you wish was still around? There are a few in my mind, but the one that got me thinking about this was from Tyl3r's thread. It is the Zip Ty Racing odometer / tripmeter drive unit plug.

White plastics

OEM plastics or at least one manufacturer making every piece so that the all the various parts match in color.

An adapter that loses the odometer off the front wheel altogether. Also MX rear fenders that aren't 4 times more than they should cost and a better variety of skid plates.

Flywheel/clutch covers, drop in auto clutch. And KIPS valves for the E's that don't have to be ordered from the UK

Definitely the plug! Haha clutch covers, as mentioned, shift levers and rear brake pedals! KICKSTANDS that mount to the frame! Nice to know Lectron has us in their offering now! The older repro/80/90’s style graphics. 300cc cylinders? Replaceable sumframes? Hahaha

Well, I meant parts that were actually made, then stopped being made instead of ones that have never been made at all.

Some 1986 - 1988 parts would be the DMC (Dave Miller Concepts) parts such as the pipe, spark arrestor, air box cover, seat cover, etc. Also, the FMF pipe is no longer sold for 1986 - 1988 models.

Pro Circuit Platinum pipe for the KDX250

Answer silencers and spark arrestors

Krause Racing pipes

Pro Taper upper triple clamp for the 1993 - 1994 KDX200

Eibach 997 fork springs for KDX250

DG pipes and silencers.

Did Bill's Pipes make a pipe at one time for the H series? I feel like I saw a picture of a pie cut style pipe on here one time... could be wrong though.

Can you not still buy DG?

Pie cut? Dynoport??

Here are a few more...

purple plastic

aqua (blue) plastic

Acerbis fork guards

Answer Roost Boost LOL

The Meier rear fender w/o the light for the E series.
E series brake lines.
Fork guards for the USD forks.
Stock style headlights for the E series.


Sent from my BLN-L24 using Tapatalk

The only thing that I wish that was still available to buy was the whole bike itself !

E-series front brake line for the '93-'94 USD forks. The aftermarket doesn't have the extension to fit around the plastic front rotor guard.

Purple plastics, OEM graphics, purple Renthal bars to name a few! You'll notice these have all been posted in the "Wanted" section by me hahaha. At minimum, I'd say make OEM plastics that are the KDX green, not the KX green.

You can still find a DG sometimes, for specific model years, but not often.