KDXRIDER.NET

Hows it goin guys....need help locating a rear hub tube for a 2002 kdx220...i have an aftermarket wheel by RAD Mfg who are now out of business..The wheel is actually for a klx or klr which was interchangeable...somewhere along the line that tube was misplaced...what i have in there is not long enough affecting the ability to tighten up the wheel correctly...hub part #'s are identical from a klx, klr and the kdx....would this mean that the tube would also be the correct size for my bike...the part numbers on the tube itself dont match...im not sure what i should get...its been awhile and i dont know what exactly this wheel needs to be tightened up. thx

Are you talking about the collar between the bearings?

Welcome to kdxrider.net.

Sounds like you mean the collars for either side of the hub between the hub and the swingarm. 92143-1259 on this diagram REAR HUB. If so they are readily available (and used on a ton of different models)

thanks guys....it was the collar between the bearing....i had one in there that was a bit short....have since gotten another one and she's all tightened up

Cool. Good job. Thanks for reporting back.