KDXRIDER.NET

So, I have a 93 KDX200 with freshly rebuilt, stock, upside down forks. I should have put some stiffer springs in for my weight but I didn't. (I'll do that this winter). But for now, if I want them to be as firm as they can be...should I turn the clickers on the bottom of the forks all the way in (clockwise) or out (counterclockwise)?

IN would be stiffer

NOTE: Always gently turn the adjuster. They are a little fragile if cranked on.

I will second KDXohio, clockwise (in) is more damping. Counterclockwise is less damping.

You will need the springs from Race Tech or FRP to fit in the forks. 1995 - 2006 KDX springs are JUST barely too wide to fit in the tubes.

Thanks for the tips