KDXRIDER.NET

Hi all need a wiring diagram for my 1997 kdx 200 Australian model any help would be great.

Hi sorry I did not reply to this earlier. I don't know that there is a AUS model specific
I will take a iPad photo from my manual and post it on page 30 from the link on my signature. It's not so easy to post photos hear.
I will play around and see what the best resolution I can post is. Let me know hear when you have it and I will take it down.

Thanks heaps for your help but the wiring on mine is different the wiring from my cdi plug and my regulator/rectifier are different colours.I'd show you a picture but I can't seem to put a picture on here.

It's a bit late to have a look what mine is doing. I have completely removed my lighting coil, regulator and harness

Another way to look at is what does each wire do and just make sure they are doing the same. I had a quick look and followed them through and its resnobly simple.

I don't think you can get it that wrong because the way the plugs go.

Thanks for your help on the subject I ended up getting the wiring diagram for the Australian model after a bit of running around.

hi where did u find the diagram i got the exact same problem as u