KDXRIDER.NET

I know this was posted here somewhere ?
I have a 2002 KDX 200 and was wondering isn't there a KX Footpeg that bolts right up ?
Or just go after market, save yourself the hassle.

Thanks
Tony

Tony, just buy some IMS pegs. I have both types, they come in "pro" and "stock". The width is the same on both (WIDE), priced around $70-$79 for the set. If you are cheap, you can find Chinese knock offs for around $30 on E-Bay. But (IMO) foot pegs are like bars....hard to ride when they break off...

IMS It Is ;)
Thanks guys

Next I miss shifts from my "Bald" stock shifter
should I go stock or aftermarket for more shifting "Grip"
(Plastic moto boots syndrome)

I've got an MSR steel shifter, it works just fine and IIRC is cheaper than stock. It does, however, sit farther away from the motor (sticks out a bit further) than stock.

mid 90's

look on the IMS site to see which are the same

Stock one is much stronger than some other iirc. There are lots of aftermarket universal ones that fit the spline, but dont stick out far enough to clear the cases. Wish I remember brands and i could be more help