Page 1 of 1
Speedometer cable guide/bracket on the front fender
Posted: 04:52 pm May 28 2014
by JasonK94Z
I went to install a new front fender the other day, and noticed there is a cable guide that is riveted to the factory front fender on the right side. I am attempting to install a KX front fender right now. Do I really need to mount that cable guide (bracket) to the new fender?
Re: Speedometer cable guide/bracket on the front fender
Posted: 05:13 pm May 28 2014
by koshari
Will you be using the speedo cable?
Speedometer cable guide/bracket on the front fender
Posted: 05:36 pm May 28 2014
by Slick_Nick
Just drill out the rivets on the old one and rivet the guide to the new fender. Takes < 10 min.
Re: Speedometer cable guide/bracket on the front fender
Posted: 07:35 pm May 28 2014
by bufftester
Only need it if you run the factory odometer. If not don't worry about it. If so^^^what Nick said.
Speedometer cable guide/bracket on the front fender
Posted: 08:00 pm May 28 2014
by Slick_Nick
Use washers on the backside of the fender also to keep the rivets from pulling through the soft plastic.
Speedometer cable guide/bracket on the front fender
Posted: 08:13 am May 29 2014
by JasonK94Z
Thanks everyone! I'm still using the odometer so I'll get some rivets.