KDXRIDER.NET

1992 kdx200 i have the brake line with the banjo end hanging off the bars and the brake disk is thi all im missing?

http://www.ebay.com/itm/1994-KAWASAKI-K ... 4657&rt=nc

probably buy a rebuild kit shown on that page also

does the kdx250 fit the kdx200?

That caliper will not work.....you need a caliper from a 89-92 KDX 200. The 93/94 200s and the 250 have USD forks and use a different caliper.
Also, unless using OEM brake lines, you will need to have your brake lines custom made for these bikes as no one makes brake lines that fit (anymore).

thanks guess i got to look for new forks?

New forks? I thought you were in need of a brake caliper.

Quite, frankly I don't think anybody can tell what you need from that picture. It's of the wrong side of the bike toward the rear.

How about pictures of the brake and master cylinder (or at least the front of the bike? What about looking at the parts breakdown (they're all on the Kawasaki website) and comparing it to your brake system to see what is missing?

picture was just to show the bike i mentioned what parts i had. but to clarify.

I am thinking 1989 - 1992 KDX200 caliper is what you need.