KDXRIDER.NET

anybody ever try a klx 400 rear fender as a MX conversion?
from pictures it looks like there is room for the frame rails to stick through as seeing how the klx has the same kind of frame rails below the fender too

this picture is from a drz, but they have a good amount of tubing under there, it might fit the kdx quite well, and at
30$ alot cheaper than the maier fender
https://lh4.googleusercontent.com/-OJLh ... C00597.JPG

Looks like it may just work. Where did you find it for $30.

ive got a klx 450 on the back of mine, it doesn't come out quite at the right height but the fender bag sorts that out as you don't really notice, it had to be cut slightly to fit which I think weakened it a bit and it then snapped, its now cable tied up and is going ok,

that all sounds a bit negative but I like it!

that's one sharp looking KDX ^

i found this one for 26$ but i didn't look at the shipping
http://www.ebay.com/itm/UFO-KAWASAKI-KL ... 923b8#shId