Taller kdx?
Posted: 01:56 pm Nov 25 2012
Is there a part I could buy to raise my kdx a little. I'm on the taller side so I want a little height.
Page 1 of 1
Re: Taller kdx?
Posted: 02:27 pm Nov 25 2012
IIRC you can buy shorter dogbones for the rear linkage to raise the end an inch or so. I did it on my 98 220 to maintain geometry after a switch to KX forks. Look on ebay.
Taller kdx?
Posted: 04:06 pm Nov 25 2012
Bar risers and seat foam?
Re: Taller kdx?
Posted: 04:52 pm Nov 25 2012
overinflate the tires ;)
Taller kdx?
Posted: 04:10 pm Nov 26 2012
I'm 6' 2"" and needed a little more height.
Went with Enduro Engineering bar risers for 1 1/8" bars and Trail Tech "Woods bend" X bars.
The EE risers also push your bars forward a tad, giving you a little more room- kills three birds with one stone- higher Up, further away and 1 1/8 bar adapter.
Fits my standing position perfect.
Trail Tech- http://trailtech.net/motorcycle_x-bars.html
Enduro Engineering- http://shop.enduroeng.com/cgi-bin/comme ... egory=88KA
Went with Enduro Engineering bar risers for 1 1/8" bars and Trail Tech "Woods bend" X bars.
The EE risers also push your bars forward a tad, giving you a little more room- kills three birds with one stone- higher Up, further away and 1 1/8 bar adapter.
Fits my standing position perfect.
Trail Tech- http://trailtech.net/motorcycle_x-bars.html
Enduro Engineering- http://shop.enduroeng.com/cgi-bin/comme ... egory=88KA
Taller kdx?
Posted: 05:33 pm Nov 26 2012
I am 6'2" also and have just about the same setup as "tirebiter". 1 1/8 Pro Taper bars and risers and a tall seat. Really made a big difference in look and feel.
Taller kdx?
Posted: 10:51 pm Nov 26 2012
Tire biter if it's not asking too much could you post a picture of you standing on the bike, I'm about the same height. Also did these mods effect handling?