Page 1 of 1
JETTING info for Taylor park CO
Posted: 02:17 pm Jul 20 2011
by trex
Anyone ride there with a kdx?I think it at 9000 ft looking for a place to start. Thanks
Posted: 02:43 pm Jul 20 2011
by UI Vandal
KDX 200 or 220? What mods? What type of riding (putting around tight singel track, or WOT)?
Posted: 04:04 pm Jul 20 2011
by trex
A 220 and 200 as far as riding a little of every thing.
Posted: 05:21 pm Jul 20 2011
by marrk_us
I've been riding the Divide Colorado area (9000ft) since 1985 on various kdx's. On my hybrid I run a 145 main jet, 48 pilot, and a CGK 017-018 needle set on the 4th clip from the top (out of 5) or (next to bottom). Air screw 1.75-2 turns out depending on conditions. Mods, FMF woods pipe, e35 acerbis carbon can w/spark arres., Rad valve, and snorkel removed from air box. I've used the same jetting/settings on several friends kdx's throughout the years with no problems. A tad rich for a stock bike but no fouling and near spot on for the modded bikes. Hope this helps.