KDXRIDER.NET

Posted: **07:20 pm Jun 02 2011**

My card holder boot cracked and my temporary fix was electrical tape and some silicone...but it is not cutting it anymore!!

I have a 89 KDX200 and was wondering if the newer (95-06) model KDX200 manifold/carb holder boot interchange.

Any help please

Thanks

Checked an online part fiche and numbers are the same but another sub number is different....so I 'm not sure!

Posted: **07:38 pm Jun 02 2011**

If the numbers don't match it most likely will not work

Posted: **07:48 pm Jun 02 2011**

Well the fiche numbers match but bike bandits numbers do not...

also, while I'm at it, what about the rear shock?

thanks

Posted: **07:49 pm Jun 02 2011**

Fiche number do not match

H = 16065-1298

E = 16065-1181

Posted: **08:03 pm Jun 02 2011**

that answers my question...thanks for your time!

Posted: **07:26 pm Jun 03 2011**

they are interchangeble.

Posted: **08:21 pm Jun 03 2011**

FWIW, The VForce reed set up is the same from 89? to 06 so the bolt pattern should line up. As far as the bend of the boot I can't say.

KDXRIDER.NET

Carb Holder interchageability between E and H models

Carb Holder interchageability between E and H models