My tale of woe for today.
Posted: 06:08 pm Feb 23 2014
Yeah they did. Took the old seal out of that collar because it was pretty dry and hard. Got the kips together fairly easily and everything moved smoothly.
KDXRIDER.NET
Discussion group for KDX enthusiasts
https://kdxrider.net/forums/
My tale of woe for today.
Page 3 of 3
Re: My tale of woe for today.
Posted: 05:16 pm Feb 25 2014
Got the exhaust and carb on today. After about 6-8 kicks she started. Feels like it is revving out much more than it was. Did an after warm up compression test and got around 155 psi. Now I just need warm weather to take her out.
My tale of woe for today.
Posted: 05:53 pm Feb 25 2014
Leave the little cover/shield for the KIPS lever OFF on the left side and rev the bike in neutral. You should see it move all by itself when the rpm hits 6000 
My tale of woe for today.
Posted: 06:13 pm Feb 25 2014
I'll have to do that next week when I button everything up. Suppose it would be a good idea just to make sure the kips is actually operating correctly.Gotanubike wrote:Leave the little cover/shield for the KIPS lever OFF on the left side and rev the bike in neutral. You should see it move all by itself when the rpm hits 6000