Posted: 09:27 pm May 14 2010
Does the stock silencer have fiberglass packing? Can't tell from the diagram.
Page 2 of 2
Posted: 09:29 pm May 14 2010
Yours is a 92 right? I think it does....
Posted: 09:37 pm May 14 2010
Yes 92 stock silencer.
there's really a lot of goo coming out the pipe.
there's really a lot of goo coming out the pipe.
Posted: 09:40 pm May 14 2010
Change your packing.... I bet it is just a gooey mess....
Posted: 10:38 pm May 17 2010
OK, what's the trick to disassembling the stock silencer?
I removed all the bolts, the end cap won't come out.
Any suggestions?
Thanks
I removed all the bolts, the end cap won't come out.
Any suggestions?
Thanks
Posted: 11:43 pm May 17 2010
the trick is to gently tap on the exhaust tip pushing it into the body so that you can pry the end cap out.
any suggestions for replacing the the fiberglass donut? will reg fiberglass muffler packing work?
any suggestions for replacing the the fiberglass donut? will reg fiberglass muffler packing work?
Posted: 11:26 pm May 19 2010
There seems to be some sort of glue or caulking around the edge on the end caps of the silencer. Any suggestion on what to use to replace them / if nec.
Posted: 08:50 am May 20 2010
Hi-Temp RTV.
Posted: 09:23 am May 20 2010
What's RTV?
Posted: 09:28 am May 20 2010
It's what's on the rack at your local Auto Parts store.....
Posted: 10:24 am May 21 2010
Posted: 06:46 pm May 23 2010
Got it, worked great.
Posted: 02:38 pm May 24 2010
air screw adjustment? turning it OUT is rich or lean?
Posted: 03:56 pm May 24 2010
lean....
Posted: 03:58 pm May 24 2010
letting more air in, so less gas, so lean. Is that right?
Posted: 03:59 pm May 24 2010
Yep!
Posted: 04:19 pm May 26 2010
Finally, got the silence cleaned up and reinstalled, raised the needle (1173) to the 4 clip (it was bogging) and it seems to run much better! Thanks all.