Page 2 of 2
Re: 2001 kdx 200
Posted: 08:17 pm Apr 08 2020
by doakley
Rack doesn't move much actually. If it rotates up and the bike runs normally it may be fine. Still, I'd probably clean the PV thoroughly. WD 40 is a band aid at best.
Re: 2001 kdx 200
Posted: 02:56 pm Apr 09 2020
by deepwoods
yes sure I agree, I will take the whole cylinder/kips off soon, but what I dont understand is that I see these youtube videos with the rack turning more than mine does and bike is running like it was again ? know what I mean?
Re: 2001 kdx 200
Posted: 06:39 pm Apr 09 2020
by doakley
I do, but it does sound like you should service it.
Re: 2001 kdx 200
Posted: 10:40 am Apr 14 2020
by deepwoods
are all the power valve / kips parts still available from kawasaki for the H(95-06) model?
Re: 2001 kdx 200
Posted: 12:32 am Apr 18 2020
by deepwoods
Uppdate.my exhaust valve rod with the Oring(pipe side.) moves slow and a bit hard, is it normal, I have cleaned it. any info on that on here? thanks
Re: 2001 kdx 200
Posted: 02:46 am Apr 18 2020
by SS109
No, it should be smooth and move easily if you are moving just the rod and sub-valve by themselves.
Re: 2001 kdx 200
Posted: 12:03 pm Apr 18 2020
by deepwoods
ok what would you call easy?