Posted: 10:42 pm Aug 25 2005
I don't think I would use PVC because it could give in a high stress moment and cause something to warp... that's proly just me being paranoid though.
But you really do need to run the TC to the top of the stem like CC said. You need all the fork adjustment you can get. On average, the KX forks are 1" longer so they must be ran higher in the clamps.
I used the KX and KDX washers and spanner nuts to make up the difference on mine too. Didn't have to buy a thing. Use the KDX stuff to mount with and the KX stuff to space...
But you really do need to run the TC to the top of the stem like CC said. You need all the fork adjustment you can get. On average, the KX forks are 1" longer so they must be ran higher in the clamps.
I used the KX and KDX washers and spanner nuts to make up the difference on mine too. Didn't have to buy a thing. Use the KDX stuff to mount with and the KX stuff to space...