Anybody done much port fettling?

[moto_psycho]

from the guides ive read the only place to mirror polish is within an inch of the port opening to the cylinder (according to yamaha's TZR tuning manual)

i will admit i was wrong, polishing all along the ports does create a power loss

neatening up ports and matching will always equate to more power, even if it is only 1 or 2 hp it doesn't cost much to take a dremel to your barrel :p

the reason i was asking was cause sometimes you open a bike up and find the casting to be completely abysmal

that being said, what a bunch of $#@&ing wankers, this has got to be one of the most closed minded forums i have ever visited

[kdxmaniac]

you have to learn how to take people...........once you get to know everyone, its becomes kinda like family.
as for being the worst website???? trust me, ive been on a good many websites, and this is the only one i come to now............that being said,

your not really porting, your just cleaning up the ports. all you need to do, and i think thats what you was intending to do, was knock the casting material down. theres nothing wrong with doing that. i do all mine that way. good luck.

[David_L6]

what a bunch of $#@&ing wankers, this has got to be one of the most closed minded forums i have ever visited

Don't let the door hit you in the ass on the way out!

[scheckaet]

With this kind of reply and attitude you're guarantied to get a lot of help .
You must be one of the most arrogant person trolling around for posting dumb comment like that.
can't take a little bit of critic/comment? boowoo

if you look on forums for RD/RZ's or RG/RGV's or KH's and GT's THERE IS LOTS OF INFO

Then why don't you go trolling there, no one is keeping you here with us, "the closed minded $#@&ing wankers".

[Slick_Nick]

Awwwwww did moto psycho hurt your feelings? Cmon ladies... Take your tampons out and act like grown men. No need to squak like hens when someone says something that "offends you."

[KDX Butterfly]

If you are such an expert why even bother bringing it up??

Wibby ...

[KDX Butterfly]

With this kind of reply and attitude you're guarantied to get a lot of help .
You must be one of the most arrogant person trolling around for posting dumb comment like that.
can't take a little bit of critic/comment? boowoo

if you look on forums for RD/RZ's or RG/RGV's or KH's and GT's THERE IS LOTS OF INFO

Then why don't you go trolling there, no one is keeping you here with us, "the closed minded $#@&ing wankers".

scheckaet ...

[KDX Butterfly]

Damn! I love you boys!!

[Mr. Wibbens]

Just doing what I do

[scheckaet]

[Julien D]

from the guides ive read the only place to mirror polish is within an inch of the port opening to the cylinder (according to yamaha's TZR tuning manual)

i will admit i was wrong, polishing all along the ports does create a power loss

neatening up ports and matching will always equate to more power, even if it is only 1 or 2 hp it doesn't cost much to take a dremel to your barrel :p

the reason i was asking was cause sometimes you open a bike up and find the casting to be completely abysmal

that being said, what a bunch of $#@&ing wankers, this has got to be one of the most closed minded forums i have ever visited

Relax man. Questioning someones motives and their reasoning for doing something should promote healthy discussion, and help you in the end. If you are open minded enough to listen to criticism that is negative along with the positive there will always be something to take away from a discussion. With both sides laid out on the table, it is easier to step back and see the whole picture. If you are not such a person, and can not do this, you will indeed not find much help over here. I doubt you will find a forum anywhere where everyone is going to be gung ho about everything you want to try. If you did find such a forum, it would not be very helpful!!!

Honestly, why would you open a thread and ask only for one specific type of feedback? How does that help? I want to know why people want to do things, and why they do NOT want to as well. One sided conversations are pointless.

[TWMOODY]

>|QBB<[/url]

from the guides ive read the only place to mirror polish is within an inch of the port opening to the cylinder (according to yamaha's TZR tuning manual)

i will admit i was wrong, polishing all along the ports does create a power loss

neatening up ports and matching will always equate to more power, even if it is only 1 or 2 hp it doesn't cost much to take a dremel to your barrel :p

the reason i was asking was cause sometimes you open a bike up and find the casting to be completely abysmal

that being said, what a bunch of $#@&ing wankers, this has got to be one of the most closed minded forums i have ever visited

Please put your User Name in the Comments field when making a Donation!












.

[SS109]

Relax man. Questioning someones motives and their reasoning for doing something should promote healthy discussion, and help you in the end. If you are open minded enough to listen to criticism that is negative along with the positive there will always be something to take away from a discussion. With both sides laid out on the table, it is easier to step back and see the whole picture. If you are not such a person, and can not do this, you will indeed not find much help over here. I doubt you will find a forum anywhere where everyone is going to be gung ho about everything you want to try. If you did find such a forum, it would not be very helpful!!!

Honestly, why would you open a thread and ask only for one specific type of feedback? How does that help? I want to know why people want to do things, and why they do NOT want to as well. One sided conversations are pointless.

Well said!

[Slick_Nick]

So, how bout that local sports team huh? ;)

[Green Hornet]

Wanker check, Wanker check..........

[Mr. Wibbens]

Wanker check, Wanker check..........

I just finished, thanks for asking

[moto_psycho]

>|QBB|QBB<[/url]

from the guides ive read the only place to mirror polish is within an inch of the port opening to the cylinder (according to yamaha's TZR tuning manual)

i will admit i was wrong, polishing all along the ports does create a power loss

neatening up ports and matching will always equate to more power, even if it is only 1 or 2 hp it doesn't cost much to take a dremel to your barrel :p

the reason i was asking was cause sometimes you open a bike up and find the casting to be completely abysmal

that being said, what a bunch of $#@&ing wankers, this has got to be one of the most closed minded forums i have ever visited

Please put your User Name in the Comments field when making a Donation!



.[/quote]


YOU HAVE AN AIR STRIKER WHAT AN IDIOT?!?!!? MY SUPERSTITIOUS BELIEFS SAY THEY ARE CRAP AND YOU ARE LESSER IN MY BOOKS FOR HAVING ONE OR EVEN FOR HAVING THE WILL TO TRY IT

[rbates9]

[moto_psycho]

[rbates9]

khl

?