1995 KDX200 Shock Internals Pictures

Post by **KDXGarage** » 02:07 pm Mar 28 2005

Just in case anyone is interested, here are some pictures of the internal components of a 1995 KDX200 shock. These are from when I worked on IndaWoods' shock recently. 1989 - 2005 KDX200 / KDX220 shocks look similar internally. 1988 and older shocks look a good bit different.

Post by **Indawoods** » 02:29 pm Mar 28 2005

Ah... what a beautiful shock!

canyncarvr · Post by **canyncarvr** » 03:11 pm Mar 28 2005

Looks like it needs to be revalved to me.

Too many flat washer thingys...

skipro3 · Post by **skipro3** » 04:26 pm Mar 28 2005

That's not the stock valve, is it?

Post by **KDXGarage** » 05:20 pm Mar 28 2005

Hi, skipro3. Yes, that is the stock piston. That is the top view (rebound side) in each picture.

EDIT: skipro3, here are a couple of pictures of the stock piston from a 1989 KDX200 shock. The first picture is the rebound side. The second picture is the compression side.

As best I can remember, the 1989 and 1995 pistons look the same. The stacks are different, but the pistons are the same.

m0rie · Post by **m0rie** » 10:14 pm Mar 28 2005

Jason - Did you note (write down) the differences in the shim stack for the 95+ shocks vs the 89-94 shim stack?

-Maurice

Post by **KDXGarage** » 08:57 am Mar 29 2005

I think I did. I would suggest you just check out the http://www.suspensionnetwork.com to compare them. He has valving listed for various year model KDX's. It would be a lot quicker than me trying to find them.

KDXRIDER.NET

KDXRIDER.NET

1995 KDX200 Shock Internals Pictures

1995 KDX200 Shock Internals Pictures