KDX200SR
-
- Member
- Posts: 36
- Joined: 09:59 am Jun 30 2020
- Country: Australia
Re: 1990 KDX200SR
What a neat rebuild!
I am curious to know what the oil tank looks like and where it goes.
I am curious to know what the oil tank looks like and where it goes.
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
I don't have pics at hand of the whole tank but you can see it here, it sits on the right hand side of the frame underneath the fuel tank.
And here is the oil pump just below the intake with a hose running to the inlet manifold.
And here is the oil pump just below the intake with a hose running to the inlet manifold.
Last edited by hi-def on 05:32 am Feb 01 2023, edited 1 time in total.
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 KDX200SR
What is the knob?
Thanks for the pics.
Thanks for the pics.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
In the bottom pic? That is the idle adjustment on the PE28 carby, quite convenient but not necessary.
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 KDX200SR
OK, yet another tidbit we didn't see in the USA.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 31
- Joined: 01:13 am Oct 03 2021
- Country: Uk
Re: 1990 KDX200SR
Great post with plenty of information , I have also acquired the sr model with the upside down forks , do you have any information as to what they are , I am looking at rebuilding mine
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 KDX200SR
1fletch, welcome to kdxrider.net. Start a new thread and a few of us can help you out some. I have had some apart and rebuilt them before more than once.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
I'm a bit behind on progress so here's an update.
After the engine went back in it was looking good, break in went well and it pulls hard, lots of fun.
After the engine went back in it was looking good, break in went well and it pulls hard, lots of fun.
Last edited by hi-def on 05:33 am Feb 01 2023, edited 1 time in total.
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
Then I decided I wanted to swap to the bigger (standard) carb on the E model from the 28mm SR one, so started sourcing parts.
Last edited by hi-def on 05:33 am Feb 01 2023, edited 1 time in total.
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
The SR has an oil injection port on its inlet rubber and the replacement one does not.
Last edited by hi-def on 05:34 am Feb 01 2023, edited 1 time in total.
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
Next up was the valve, I filed a spare down using a drill and can now insert it inline before the carb.
Last edited by hi-def on 05:35 am Feb 01 2023, edited 1 time in total.
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
A couple extras were added after
Some reeds
Some reeds
Last edited by hi-def on 05:35 am Feb 01 2023, edited 1 time in total.
- Slick_Nick
- Supporting Member
- Posts: 1684
- Joined: 10:06 pm Oct 22 2009
- Country: Canada
- Location: Calgary, Alberta
- Contact:
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 KDX200SR
Heck yeah! Looks nice!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
- Slick_Nick
- Supporting Member
- Posts: 1684
- Joined: 10:06 pm Oct 22 2009
- Country: Canada
- Location: Calgary, Alberta
- Contact:
Re: 1990 KDX200SR
i found that float bowl on ebay, doesn't look like it has a provision for any sort of overflow tube, or a removable bowl plug. If your float ever sticks open, it'll likely fill your crankcase with fuel before it comes out of the breather hoses on the carb.
'00 KDX 220R
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
Yeah it's not the best design, unfortunately my original metal bowl will do the same due to a previous owners handiwork :(
-
- Member
- Posts: 7
- Joined: 12:41 am Feb 14 2022
- Country: Australia
Re: 1990 KDX200SR
EDIT: (what you typed was edited out)
Please leave kxrider.net out of the copyrighted manual discussion as I mentioned earlier in the thread.
Please leave kxrider.net out of the copyrighted manual discussion as I mentioned earlier in the thread.
-
- Member
- Posts: 55
- Joined: 10:31 pm Aug 25 2020
- Country: New Zealand
Re: 1990 KDX200SR
My KDX is still going strong
Last edited by hi-def on 05:36 am Feb 01 2023, edited 1 time in total.
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 KDX200SR
Looking good!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128