Headlight Wires

[NewKDX]

What are the 2 wires for? I have circled them. Please copy and paste the link into your browser.

http://i68.tinypic.com/iq9c0z.jpg

EDIT from Jason: Use the Img button and put the URL inside the tags.

[KDX Connor]

Hopefully this helps.

[NewKDX]

So you are having trouble viewing the photo?

[KDX Connor]

No no I just wanted to post it on the forum so you didn't have to click on the link.

[NewKDX]

Yeah I would of liked to do that but I couldn’t figure it out.

[NewKDX]

Could you tell me what those wires are for? Are they for just the switch?

[ericr]

They go to the switch.

[NewKDX]

Okay I have a trial tech switch wired in. And some how it still works without those 2 wires being connected. I just want to make sure I don’t ruin anything. My only concern is I don’t want ruin anything.

[NewKDX]

Also right now I have a 2005 KDX 200 and the headlight is for a 2003 KDX 200 could there be some differences?

[ericr]

Here's the wiring diagram. 2003 and 2005 H series should be wired the same. Yellow is AC positive from the magneto. It goes to the headlight switch and becomes Red positive for the headlight and taillight. Black is ground. I don't know how you got positive power without using the yellow wire.

[NewKDX]

Yeah I have the power wires hooked up and the ground wire attached as well. My only concern is what do I do with the 2 wires that I have circled in the picture? What are they used for thanks.

[NewKDX]

Here is how I have it connected and it still seems to work. As you can see I can get the light to work with the trail tech switch by plugging it into the wires on the bike. You can also see I am not using the 2 wires located further down on the headlight, what are those for? Do I need to use them?



What are these used for because I don't need them?

[NewKDX]

If I’m getting power to the headlight one way or another and I have the switch hooked up in order to turn the light on and off. Could I damage the stator or anything on the bike if it’s working but hooked up in a different way? That’s my only concern if it’s hooked up and working but hooked up differently can I damage anything over time? Please let me know!! I also figured out how to upload pictures!