Sorry for the delay - I know quite a few of you have been on my case to get these made and you did well.
I'm also well aware that I must have missed my expected manufacture deadline about a dozen times.
Please remember that we are only 3 full time members of staff and we have a very large range of work that we do.
Anyway here we are - below is one of the two valves and idler gear which we have drawn as solid models for the KDX200 E models.
We are now at the point of production and are ordering some steel so that we can begin the machining process, but at this stage we need your help to ensure proper quality control before pressing the 'go' button on a full production run.
We anticipate having these valves available for purchase in around 4 weeks time.
So what we really need from somebody is a barrel, head, shaft, bushes and if possible valves so that we can try ours in there, make sure they work as intended, that our tolerances are good and that the ports line well and adjust if necessary. Clearly this is only a borrow although we may need this to be for a few weeks.
What's in it for the helpful fellow? Topset, return postage and half price valve set.
Anybody willing? Ideally we need someone in the UK.
No doubt you'll want to know a firm price but to be honest we haven't costed it correctly yet, however a fair bet is to say about 30% more than a set of KMX200 valves due to the extra idler gear and bush.
I drove myself crazy looking through the parts fiches and finding out that they changed the power valves for every model letter change on these but hopefully it will turn out to be worthwhile exercise.
Well that's about it for now - if you prefer to email me direct it's brock@bdkraceeng.co.uk or if it's a voice you want to speak to it's
0044 (0)1508 481713
Hope to hear from you soon - keep causing trouble,
Brock
