Kips governor shaft lever
-
- Member
- Posts: 12
- Joined: 10:25 am Sep 29 2023
- Country: Japan
Kips governor shaft lever
I unfortunately unscrewed the lever (a)
My question:
How does one put this back in its position (is it aligned with the rear e-clip? ) ?
-1991 KDX250SR (japan mod).
-
- Gold Member
- Posts: 114
- Joined: 08:41 pm Jul 26 2009
- Country: Canada
- Location: Vancouver BC Canada
Re: Kips governor shaft lever
Later KX model but give a good idea how to install. About 20min into this video.
02 KDX220
-
- Member
- Posts: 12
- Joined: 10:25 am Sep 29 2023
- Country: Japan
Re: Kips governor shaft lever
Yes, thanks! That's the way I fitted it now.
Got some new spark plugs today. Will test ride later to see if it runs on high rpms.
Got some new spark plugs today. Will test ride later to see if it runs on high rpms.
-
- Member
- Posts: 12
- Joined: 10:25 am Sep 29 2023
- Country: Japan
Re: Kips governor shaft lever
Works fine now![👌](//twemoji.maxcdn.com/2/svg/1f44c.svg)
The main issue was that the engine did not get enough air supply- would not rev on high rpms- so took of the air box lid (with snorkel) and now it runs like a mean machine on gazoline![Rock ya :rock:](./images/smilies/icon_kidra.gif)
mj 128
pj 42
needle 3. pos
original muffler and carb (pwk35)
The main issue was that the engine did not get enough air supply- would not rev on high rpms- so took of the air box lid (with snorkel) and now it runs like a mean machine on gazoline
![Rock ya :rock:](./images/smilies/icon_kidra.gif)
mj 128
pj 42
needle 3. pos
original muffler and carb (pwk35)
- SS109
- KDXRider.net
- Posts: 5812
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Re: Kips governor shaft lever
![Shocked :shock:](./images/smilies/icon_eek.gif)
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- bufftester
- Platinum Member
- Posts: 3465
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: Kips governor shaft lever
I thought the OEM carb on the SR was a 28mm. That small a MJ on a PWK35 and you're going to have issues with longevity as SS109 said.
-
- Member
- Posts: 12
- Joined: 10:25 am Sep 29 2023
- Country: Japan
Re: Kips governor shaft lever
Yes I know mj 128 is lean (with no lid on the airbox), but it's stock size along with #42 pj.
The carb is 35mm pwk. It's not a KDX250 (US version, which has a 38mm and different jetting and piston etc).
- KDXGarage
- KDXRider.net
- Posts: 14097
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Kips governor shaft lever
Congratulations on getting it sorted. When jetting, the consequences of too rich is far less penalizing than too lean. Start rich and work down. :-)
Thank you for participating on kdxrider.net. ![Clap :bravo:](./images/smilies/eusa_clap.gif)
To post pictures from a device: viewtopic.php?f=88&t=24128
![Clap :bravo:](./images/smilies/eusa_clap.gif)
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 12
- Joined: 10:25 am Sep 29 2023
- Country: Japan
Re: Kips governor shaft lever
Thanks, yes I agree - Better off starting too rich than lean
I think I'll just need to drop the needle from 4th
to 3rd or 2nd clip position. Way too rich in the low and mid range, but really pulls on wot![Rock ya :rock:](./images/smilies/icon_kidra.gif)
![Very Happy :grin:](./images/smilies/icon_biggrin.gif)
I think I'll just need to drop the needle from 4th
to 3rd or 2nd clip position. Way too rich in the low and mid range, but really pulls on wot
![Rock ya :rock:](./images/smilies/icon_kidra.gif)