Page 1 of 1

95 kdx 200 clutch basket/plates removal

Posted: 11:37 am Oct 20 2019
by 95kdx
Hi there,
I am in the process of replacing my basket & clutch plates on my 95 200. I was wondering if there is a post/video here that shows the step by step removal procedure? I have Cyclepedia, but it's seems a little robotic for my liking. Appreciate the feedback.

Re: 95 kdx 200 clutch basket/plates removal

Posted: 04:13 pm Oct 22 2019
by SS109
No video that I know of. It's pretty straightforward though. Just follow everything step by step. It's a good idea to use a flywheel holder on the ignition side or improvise a way to do it without damaging the clutch basket. Also, an impact wrench really helps.

Re: 95 kdx 200 clutch basket/plates removal

Posted: 06:42 pm Oct 22 2019
by bufftester
Pretty much any 2T video on clutch replacement will give you the general idea, along with the specifics from Cyclepedia.

Re: 95 kdx 200 clutch basket/plates removal

Posted: 02:03 am Oct 23 2019
by KDXGarage
Welcome to kdxrider.

Re: 95 kdx 200 clutch basket/plates removal

Posted: 11:17 am Oct 23 2019
by kdxsully
I made a clutch holding tool out of an old steel clutch plate and a piece of scrap steel, bolting then together with some nuts, using nuts in between to space it. Works good if you don’t need to do the job often.