95 kdx 200 clutch basket/plates removal

This area is for KDX 200 H series part numbers etc...
Post Reply
95kdx
Member
Posts: 1
Joined: 10:32 pm Apr 02 2018
Country: Canada

95 kdx 200 clutch basket/plates removal

Post by 95kdx » 11:37 am Oct 20 2019

Hi there,
I am in the process of replacing my basket & clutch plates on my 95 200. I was wondering if there is a post/video here that shows the step by step removal procedure? I have Cyclepedia, but it's seems a little robotic for my liking. Appreciate the feedback.

User avatar
SS109
KDXRider.net
KDXRider.net
Posts: 3848
Joined: 05:11 am Aug 23 2009
Country: US
Location: Tucson, AZ, USA
Contact:

Re: 95 kdx 200 clutch basket/plates removal

Post by SS109 » 04:13 pm Oct 22 2019

No video that I know of. It's pretty straightforward though. Just follow everything step by step. It's a good idea to use a flywheel holder on the ignition side or improvise a way to do it without damaging the clutch basket. Also, an impact wrench really helps.
AZ State Parks OHV Ambassador - Trail Riders of Southern AZ
'11 GasGas EC250 Race
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue

User avatar
bufftester
Platinum Member
Platinum Member
Posts: 2472
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: 95 kdx 200 clutch basket/plates removal

Post by bufftester » 06:42 pm Oct 22 2019

Pretty much any 2T video on clutch replacement will give you the general idea, along with the specifics from Cyclepedia.

User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 10147
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 95 kdx 200 clutch basket/plates removal

Post by KDXGarage » 02:03 am Oct 23 2019

Welcome to kdxrider.
kdxrider.net forum member doakley participating in National Enduro series: (current class standing, 4th!)
viewtopic.php?f=136&t=23217&sid=e6a86d8 ... 9&start=40

Thank you for participating on kdxrider.net. :bravo: To post pictures here: "Full editor", "Attachments", "Add files", select the picture, "Open", "Place inline"

kdxsully
Member
Posts: 401
Joined: 08:28 am Apr 21 2019
Country: United States
Location: North Cackalack

Re: 95 kdx 200 clutch basket/plates removal

Post by kdxsully » 11:17 am Oct 23 2019

I made a clutch holding tool out of an old steel clutch plate and a piece of scrap steel, bolting then together with some nuts, using nuts in between to space it. Works good if you don’t need to do the job often.
I like turtles

Post Reply