IMS Pro Series Pegs Fit Problems

Discussion specific to the 1995 - 2006 KDX200 (H Series) and 1995 - 2005 KDX220R (A Series) models sold in the USA
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: IMS Pro Series Pegs Fit Problems

Post by 6 Riders »

Malibu406 wrote: 02:58 am Jan 09 2020 Actually I dont like the ims pro pegs as much as stock having done the change. The shifter arm is already short and the wdie pegs make it harder to pivot and roll on the footpegs. If I hadnt had to drill out the pin bore to install them, I would put the stock pegs back on.
Raise the shifter a notch or 2
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
User avatar
doakley
Gold Member
Gold Member
Posts: 1241
Joined: 02:58 pm Mar 10 2016
Country:

Re: IMS Pro Series Pegs Fit Problems

Post by doakley »

I bought these from RMATV and they bolted right up without any modifications at all on my 1999 KDX 220. I really like them.
Pegs.JPG
Pegs.JPG (14.19 KiB) Viewed 3536 times
User avatar
SS109
KDXRider.net
KDXRider.net
Posts: 5770
Joined: 05:11 am Aug 23 2009
Country: USA
Location: Tucson, AZ, USA
Contact:

Re: IMS Pro Series Pegs Fit Problems

Post by SS109 »

Still loving my IMS Pro Series pegs!
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 580
Joined: 07:50 pm May 26 2017
Country: USA

Re: IMS Pro Series Pegs Fit Problems

Post by VTMTcowboy »

doakley wrote: 04:18 pm Jan 09 2020 I bought these from RMATV and they bolted right up without any modifications at all on my 1999 KDX 220. I really like them.

Pegs.JPG
Hello Doakley,

Would you be able to provide photos of the pegs/mounting point to the frame? Also a shot of the pin insert locations? No rush, just want to see if I am missing something.

Thank you sir.
1997 KDX 220
2004 KDX 200
User avatar
doakley
Gold Member
Gold Member
Posts: 1241
Joined: 02:58 pm Mar 10 2016
Country:

Re: IMS Pro Series Pegs Fit Problems

Post by doakley »

Happy to. Stand by.
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 580
Joined: 07:50 pm May 26 2017
Country: USA

Re: IMS Pro Series Pegs Fit Problems

Post by VTMTcowboy »

doakley wrote: 02:46 pm Jan 22 2020 Happy to. Stand by.
Thank you sir!
1997 KDX 220
2004 KDX 200
User avatar
doakley
Gold Member
Gold Member
Posts: 1241
Joined: 02:58 pm Mar 10 2016
Country:

Re: IMS Pro Series Pegs Fit Problems

Post by doakley »

IMG_4040.jpg
IMG_4040.jpg (112.76 KiB) Viewed 3497 times
IMG_4041.jpg
IMG_4041.jpg (97.05 KiB) Viewed 3497 times
IMG_4042.jpg
IMG_4042.jpg (83.98 KiB) Viewed 3497 times
IMG_4043.jpg
IMG_4043.jpg (86.98 KiB) Viewed 3497 times
IMG_4044.jpg
IMG_4044.jpg (150.71 KiB) Viewed 3497 times
Any of these help. I only shot the rt side. Since I don't have a foot brake I thought you'd get a clearer look.

Edit: Sorry, looks like all the photos need to be rotated and I can't seem to figure out how to do that.
User avatar
VTMTcowboy
Gold Member
Gold Member
Posts: 580
Joined: 07:50 pm May 26 2017
Country: USA

Re: IMS Pro Series Pegs Fit Problems

Post by VTMTcowboy »

doakley wrote: 09:47 am Jan 23 2020 IMG_4040.jpg
IMG_4041.jpg
IMG_4042.jpg
IMG_4043.jpg
IMG_4044.jpg

Any of these help. I only shot the rt side. Since I don't have a foot brake I thought you'd get a clearer look.

Edit: Sorry, looks like all the photos need to be rotated and I can't seem to figure out how to do that.
Very much appreciated Doakley! The pictures will help immensely. I will give it another try on my weekend. I think I'll have to drill out the pin holes a little bit. I'll update when I get a chance. Thank you again.
1997 KDX 220
2004 KDX 200
Post Reply