need some help pls not sure where locating pin go

[Kdxfan4130]

.......

[KDXGarage]

Flywheel woodruff key
#610?

Ooops, do you see 610 on the diagram? Is this the pin that was loose?

[KDXGarage]

Are you able to take a picture of your bike? It would be helpful to see what you are seeing.

Thank you.

[SS109]

...one more thing what kind sleeve do i buy also size of the piston send link pls ebay only..

I can't believe no one has said anything yet! I would not recommend sleeving your cylinder! Send it off to have it replated. An improperly done sleeve will ruin your cylinder. With the cost of machining it for the sleeve, the cost of the sleeve itself, and the labor for doing it, you might as well have it repaired/plated properly by Millenium.

[0ops_sorry]

...one more thing what kind sleeve do i buy also size of the piston send link pls ebay only..

I can't believe no one has said anything yet! I would not recommend sleeving your cylinder! Send it off to have it replated. An improperly done sleeve will ruin your cylinder. With the cost of machining it for the sleeve, the cost of the sleeve itself, and the labor for doing it, you might as well have it repaired/plated properly by Millenium.

rip i send my cylinder to some guy from ebay to get it sleeve rip my life sadface thanks for helpin out tho <3 i like to donate

[kdxsully]

...one more thing what kind sleeve do i buy also size of the piston send link pls ebay only..

I can't believe no one has said anything yet! I would not recommend sleeving your cylinder! Send it off to have it replated. An improperly done sleeve will ruin your cylinder. With the cost of machining it for the sleeve, the cost of the sleeve itself, and the labor for doing it, you might as well have it repaired/plated properly by Millenium.

He could keep an eye out for a used cylinder on eBay and maybe sell the sleeved one on eBay.

[Kdxfan4130]

Can someone link the problems associated with going with a steel sleeve in the kdx cylinder? I’ve read slight difficulties when going that route

[sarrant]

Can someone link the problems associated with going with a steel sleeve in the kdx cylinder? I’ve read slight difficulties when going that route

The disadvantages of sleeves are: less durable than plating, higher friction, worse heat transfer characteristics, and porting can have poor match/transition to cylinder.

That said, If you've already bought the sleeve, just run it.

[kdxsully]

And it costs the same as a replate.

[SS109]

What they said!

[0ops_sorry]

Can someone link the problems associated with going with a steel sleeve in the kdx cylinder? I’ve read slight difficulties when going that route

The disadvantages of sleeves are: less durable than plating, higher friction, worse heat transfer characteristics, and porting can have poor match/transition to cylinder.

That said, If you've already bought the sleeve, just run it.

[0ops_sorry]

Can someone link the problems associated with going with a steel sleeve in the kdx cylinder? I’ve read slight difficulties when going that route

got my sleeve today

[KDXGarage]

All right! Take your time during reassembly. Don't forget about the left hand threads on the shaft and nut of the power valve system advancer rod.

[0ops_sorry]

All right! Take your time during reassembly. Don't forget about the left hand threads on the shaft and nut of the power valve system advancer rod.

thank you <3 for the info

[SS109]

Since you had it done, and if you don't mind saying, which company did you use for the sleeve and what was your total cost for it?

[kdxsully]

Put some oil in there too.

[Kdxfan4130]

Looks like a nice job. Now you can bore it to the next oversize. Are there oversized piston kits available? Or do you need to find a piston off another brand I.e. Yamaha?

[0ops_sorry]

Since you had it done, and if you don't mind saying, which company did you use for the sleeve and what was your total cost for it?

SERVICE was $120 https://www.ebay.com/usr/lynncampspeedshop-fb he did a good job bought a new piston and la sleeve total cost i say around 300

[SS109]

Since you had it done, and if you don't mind saying, which company did you use for the sleeve and what was your total cost for it?

SERVICE was $120 https://www.ebay.com/usr/lynncampspeedshop-fb he did a good job bought a new piston and la sleeve total cost i say around 300

Thank you. This info will be helpful to others in the future if they are considering having their cylinder sleeved.

[0ops_sorry]

Since you had it done, and if you don't mind saying, which company did you use for the sleeve and what was your total cost for it?

SERVICE was $120 https://www.ebay.com/usr/lynncampspeedshop-fb he did a good job bought a new piston and la sleeve total cost i say around 300

Thank you. This info will be helpful to others in the future if they are considering having their cylinder sleeved.

done!!! <3 start in the 5th try maybe 7 lool