forks shim stack mod

Got questions? We got answers....
Post Reply
kdxdazz
Member
Posts: 430
Joined: 07:51 am Dec 28 2017
Country: thailand
Location: Thailand

forks shim stack mod

Post by kdxdazz »

pulled apart my shim stack and the top nut and thread just peeled away. took it to the machine shop and he assured me he can fix it but will wait and see. my question is in regard to the rest of the shim stack assembly,the previous owner must have already been in as there was only 8 shims, i removed another 3 as i am so light and everything i do is slow single track. i need to double check everything the previous owner has done as most of it is wrong,\, in the photo of the assembly is it in the right order? the washer with holes in it has the protruding edge facing in towards the fingered basket?
is there anything else i should check before assembly, this is my first time working on a shim stack
Attachments
broken thread
broken thread
resized.jpg (1.85 MiB) Viewed 733 times
shim stack assembly
shim stack assembly
IMG_20191125_135049.jpg (605.59 KiB) Viewed 733 times
1999 KDX220SR (KDX220-B5)
Post Reply