KDXRIDER.NET

This thread was inspired by a different site that I am on that also deals with older bikes. Basically, the idea is that people can offer up parts for other members free of charge other than shipping costs. The hope is that as these bikes get older and folks are hunting for that kick starter, or shift pawl, or an air box lid, or whatever part is keeping them from contributing to the ozone hole, we can help each other out and maybe make a deposit in our karma bank. Even better than paying shipping, I'd suggest that the person asking for an item make a small donation to the site instead. This invaluable resource isn't free, and the cost is largely borne by our own energetic Julien D and KDXGarage. So what do you say? Got any spare parts laying around cluttering things up?

I'll kick it off by offering up a KDX220 airbox lid, the oft discussed and generally mutilated object of many a jetting discussion. It is in perfect shape with snorkel intact and all the bolts. A $5 donation to the site and I'll ship it to you, first come, first served.

Let's spread a little green love, and a lot of 2T smoke!

This is a great idea! I send fellow riders free parts all the time ,but never thought of having them make a donation. I will remember this. We need to keep this great site going for one of the greatest woods weapons of all time.

Donation sent just because not for part.

Awesome idea mate! If I could somehow find out if a 220 would fit a 250sr airbox I would make that donation immanently.

Thanks

EDITED by KDXGarage during thread clean up. Thank you.

Anyone need a new wristpin bearing? Wiseco B1404 new in package. Fits most Suzuki 2 stroke and some older Yamaha 2 stroke motors. PM and it’s yours.

I've got kdx 250sr barrel needs work, sr version only has side valves. No center power valve on this model

I did a little thread clean up.

If you want a part, please make a new post in the "Wanted" subforum.

If you have a part to give away, please post it in this thread.

Thank you.

I have a set of stock fork springs out of a 1998 kdx200
I would give away

I have a set of springs also from a 1999 kdx220, front and rear brake lines and a fmf desert pipe. rather give it away than throw it away.

Zombie911....I'd like the FMF pipe. Where are you located?

zombie911 wrote: ↑12:18 pm Jun 03 2019 I have a set of springs also from a 1999 kdx220, front and rear brake lines and a fmf desert pipe. rather give it away than throw it away.

I'm located in so cal, would be very interested in taking those springs off your hands if the fella above you doesn't respond first.
leininger DOT md AT gmail DOT com

Thank you.

Hey Zombie911, I’d love the fmf if you still had it.

I found some fork seals and dust seals from my old kx if anyone wants them I’ll ship them out. They might fit someone with a fork swap. Pm me if you’re interested.

Power addict, still have the seals?

Zombie911, is the pipe still available?

I have an LED headlight bulb, for stock H series headlight. Can't tell you if it is a worthwhile change, as I have an aftermarket headlight. Free to whoever wants.

Let me throw one more thing on this thread. Please do not take items that you do not currently need. Thanks.

NEW BRAKE SEALS FOR '89-'94 E SERIES KDX. Part # 19-1008

I have a new set of rear brake seals for an "e" series KDX. The ebay listing was wrong. These DO NOT FIT THE "H" SERIES KDX. Please see the pic, it states the models this seal kit is for. Seals only, no pins, washers or boots. Shoot me a USA address and I will drop them in the mail.

"These DO NOT FIT THE "H" SERIES KDX."

Sure they do. Check the part numbers. They actually fit the F R O N T caliper for 1995+ if my researching is correct.

These do not fit the H Rear caliper sir. After doing some more searching I found the rear seal part number is
19-1005.

I get it. They don't fit the rear. They fit the front. Do you not have a KDX front caliper? (might be using some other one I suppose)