Boysen dual stage power reeds w/fmf gnarly

A reference for the PWK carbs...
Post Reply
User avatar
TRUAX
Gold Member
Gold Member
Posts: 88
Joined: 10:02 am Oct 24 2016
Country: USA
Location: Rochester, MN

Boysen dual stage power reeds w/fmf gnarly

Post by TRUAX »

Anyone out there running the dual stage power reeds with the fmf gnarly woods pipe? Also have have fmf spark arrestor. I rescued the bike this winter and went through everything, just wondering what general direction to head from the stock jetting that is in there now. If anyone has a basline with this combo hook it up!
User avatar
TRUAX
Gold Member
Gold Member
Posts: 88
Joined: 10:02 am Oct 24 2016
Country: USA
Location: Rochester, MN

Re: Boysen dual stage power reeds w/fmf gnarly

Post by TRUAX »

0-1000 ft above sea level, with typical 50% humidity in Minnesota
User avatar
TRUAX
Gold Member
Gold Member
Posts: 88
Joined: 10:02 am Oct 24 2016
Country: USA
Location: Rochester, MN

Re: Boysen dual stage power reeds w/fmf gnarly

Post by TRUAX »

Nevermind this thread, Boyesen has a base line chart on the site.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Boysen dual stage power reeds w/fmf gnarly

Post by KDXGarage »

Just remember to start ith the air screw and pilot, then work your way up.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
TRUAX
Gold Member
Gold Member
Posts: 88
Joined: 10:02 am Oct 24 2016
Country: USA
Location: Rochester, MN

Re: Boysen dual stage power reeds w/fmf gnarly

Post by TRUAX »

Yea that's where I started, turns out it's not a jetting issue...
Post Reply